Try This: Lampshade Made From Plastic Bags

See plastic bags in a whole new light.

| September/October 2009

Plastic shopping bags are disastrous for the environment. This project takes a few of those wayward bags out of the landfill and puts them to work. This beautiful, earthy pendant lampshade is made of used shopping bags—the flimsy kind you get from the grocery store.

• 10 to 15 plastic grocery shopping bags (4 beige, the rest white)
• 8 bamboo skewers, each at least a foot long
• 2 feet lightweight twine or fine copper or brass wire
• Lamp socket with cord
• Compact fluorescent bulb

• Scissors
• Towel to cover work surface
• Parchment paper
• Iron
• Metal ruler or straightedge
• Craft blade or box cutter

1. Cut off bottom seam and handles of bags. Cut off printed area to create large expanses of unprinted plastic. Cover work surface with a towel, then a sheet of parchment. Heat iron to medium.

2. Lay two or more sheets of white bag so they overlap by a couple inches, creating a one-layer base that’s 14 by 36 inches. Stack pieces until base is three layers deep. Cover with parchment and iron from center outward so plastic fuses—30 to 60 seconds. Let cool. Add a fourth layer and iron so finished “fabric” is four layers thick. Flip and iron other side. If fabric is not fully laminated, iron again.

3. Place beige bag pieces over white plastic fabric. The beige plastic should overlap randomly in places. Iron and fuse as before. Don’t worry if beige plastic skips a spot, folds or creases on itself—this will add character. Add more scraps as desired. Hold “fabric” up to the light to see how it will look illuminated.

mother earth news fair 2018 schedule


Next: April 28-29, 2018
Asheville, NC

Sit in on dozens of practical workshops from the leading authorities on natural health, organic gardening, real food and more!