Au Revoir, Allergens: Reduce Sources of Indoor Allergies

article image
Photo By Povy Kendal Atchison
One of the easiest ways to reduce our homes’ chemical loads is to remove shoes upon entering the house.

Allergy sensitivities are on the rise. They’ve doubled since the 1970s, according to a 2005 study by the National Institutes of Health. Some of that increase may be because most of us spend up to 90 percent of our time indoors, meaning we are almost constantly exposed to airborne allergens in our offices, homes and cars.

The most common home allergens are particulates and chemicals. Particulates include seasonal pollen, mold, dust, dust mites and animal dander. Indoor chemicals associated with allergies include formaldehyde, volatile organic compounds (chemicals that outgas from products such as plywood and fiberboard), conventional paint and finishes, and permanent fabric treatments. By improving air flow and reducing sources of particulates, chemicals and moisture, we can reduce our homes’ levels of typical airborne allergens. Here are some strategies.

Particle Matters

Many of the chemicals in our homes are tracked in from our shoes and pets’ feet. One of the easiest ways to reduce our homes’ chemical loads is to remove shoes upon entering the house. We can also reduce exposure to tracked-in grime by making bedrooms off-limits to pets.

To control allergens that do get in, vacuum frequently, including upholstered furniture, with a HEPA vacuum independently certified to capture at least 99 percent of particulates. This is especially important if you have wall-to-wall carpet or pets. If you don’t have a HEPA vacuum, open windows while vacuuming and for 30 minutes afterward, as non-HEPA vacuums can stir up allergens. You might also invest in a HEPA air cleaner that filters particulates such as dust, pollen, dander and mold. The best HEPA cleaners contain carbon for chemical filtering.

Moisture Patrol

Moisture helps create an ideal environment for mold and other allergens. One of the most common sources of indoor moisture is condensation from bathing and cooking. Run exhaust fans when cooking and for 30 minutes after bathing, even if your bathroom has a window. (Make sure exhaust fans vent to the outdoors.) While fans are running, it’s wise to crack a nearby window to provide a source of makeup air (see “This House Doesn’t Suck” below). Outdoor moisture may also lead to indoor mold. Make sure your home’s drainage directs water away from foundation walls. 

In basements, avoid materials mold thrives on such as drywall and carpet. Instead, choose hard materials such as concrete, ceramic, tile and stone. Keep moist basement air out of living spaces by installing an airtight seal around the basement door and caulking holes where plumbing and electrical wires pass from the basement to the ground floor. Also install weatherproofing around attic doors.

Carpet cleaning and humidifying increase indoor moisture. If carpet doesn’t dry quickly after cleaning, you may end up with low levels of mold you can’t see or smell. Use chemical-free cleaning methods that require the least water, and only clean carpets when humidity is low and you can open windows. If you hire professionals, ask them to extract as much moisture as possible. If you use a humidifier, use filtered water and clean the reservoir with 3 percent hydrogen peroxide before refilling to prevent mold and bacteria.

Death to Dust Mites

The average bed is home to 100,000 to 10 million dust mites. Along with their favorite food—our skin particles—mites thrive on warmth, moisture and darkness. Before making the bed, pull back covers and air bedding, reducing moisture. When it’s sunny, air bedding outdoors. Wash sheets in hot water weekly if you are dust mite-sensitive. Unless they are filled with organic or chemical-free wool, which is naturally mite-resistant, encase mattresses, pillows and comforters with nontoxic dust mite barrier covers tightly woven to at least 4.91 microns. Seek barrier covers that are free of PVC and antimicrobial, stain- or wrinkle-resistant treatments (see Resources).

Increase Air Flow

Unless you have seasonal pollen allergies or live in a highly polluted area, open windows whenever weather allows. Fresh air and sunlight are great remedies for high levels of particulates, mites, moisture and chemicals. For fast relief, open windows and turn on all exhaust fans. Whole-house fans ventilate your entire home. If you install one, make certain its exhaust is mechanically vented to the outdoors, not into the attic. 

Mary Cordaro is president of Mary Cordaro Inc, where she works as a healthy home consultant and certified Bau-Biologist. She lectures around the country.  

This House Doesn’t Suck

When you turn on your furnace, air conditioner or exhaust fans, your home may become “negatively pressurized,” an effect that causes indoor air to “suck in” pollutants from basements, wall cavities, attics and crawl spaces. To prevent this effect, keep all interior doors open and crack one window on each floor when furnace or fans are running. Change furnace filters when you see grime buildup, or once every six months.

Resources 

Mattress barrier encasements 

Allergy Store
Organic Mattresses, Inc. 

HEPA vacuums 

Miele
Nilfisk 

HEPA room air filters 

Honeywell
IQAir
Mary Cordaro Inc 

  • Published on Mar 28, 2011
Online Store Logo
Need Help? Call 1-800-456-6018
Free health and natural beauty tips from Mother Earth News!