Try This: Steel Candle Covers

Make these galvanized steel candle covers with simple sheets of steel, nuts, bolts and pieces of wire from the hardware store.

STEP 4: For the long, narrow tealight cover, use nuts and bolts to position the sides at an angle. For the bottom, we used two 3-inch #6 bolts (make sure before purchasing that they go through the holes in your mending plate). For the top, we used two 11/2-inch #6 bolts. Thread the bolts through the holes in the four corners of each plate, leaving enough of the bolt exposed to fasten on the nut. This cover looks lovely with three tealights nestled inside.
Photo By Susan Wasinger