Give new life to old chairs and make a headboard with a cheerful twist.
Using a screwdriver and hammer, liberate the back from the rest of the chair. Every chair is put together a little differently, but most need a couple of screws removed and then some hearty taps with the hammer to release old glue joints before the chair falls to pieces. If the glue is still strong, and the joint won’t budge, use a saw to dismantle it.
Decide how best to attach the headboard to your bed frame. For our standard metal frame, we used a piece of 1-by-4-inch pine cut to the length of the bed frame. We spaced the four chairs along it, adjusting the height of the chairs so that plenty of headboard would be visible once the mattress and boxspring were in place. Using a screwdriver and 16 wood screws, we attached the chair backs by their legs to the board. Finally, we bolted the headboard to the metal bed frame.
Four mismatched chairs from the flea market, junk store, or grandma’s attic make a perfect headboard for a queen-size bed. They’re screwed to a board, which attaches with two bolts to the standard metal bedframe.
We chose one color, then mixed paints in varying shades of that color. We brushed the paint on sparingly and unevenly to give the project a bit more character.
Find four wooden chairs whose back legs are one piece with the chair back so they extend from the top of the chair down to the floor. On some chairs, the back is attached to the seat only and would not be suitable for this project.